GFC Cabinet System - The TurboCubby

Maximum weight is too dependent on the vehicles use-case to specify a rating. We typically run a heavy bag of recovery gear, a pelican toolbox, a big air compressor, stove, propane tank, cook partner stove, duffel bag of clothes, bag of cooking gear, three gallon water can, a couple of camp chairs, and various other odds and ends.

Yes! Each cabinet has an access panel cut into the rearmost section of the cabinet, and can be retrofitted later to a sliding door (not currently released)

Yes. Each cabinet is generated on a parallel template to the specific Camper or Topper. This allows for a perfect fit, optimizes for strength, and maximizes usability.

The cabinet is available in a single color; Bright White River. This coating has the same texture as our river texture panels, and offers excellent durability and wear resistance. The bright gloss white color illuminates the interior, and helps you locate your gear more easily.

For beds from 5’ to 6.75’, there is one vertical divider that creates two separate bays. 8’ Beds Include two vertical dividers, which create three separate bays.

No, each divider is actually a structural member that provides torsional strength to the cabinet. However, we do sell non-structural dividers that can be used to segment shelves

It depends; for most off-road and on-road applications, side braces are not required and can be removed. If the truck gets jumped or frequently encounters strong or consistent impacts (ie whoops) we strongly recommend keeping the braces installed.

The cabinet is available in both configurations; your preference will vary with how you use the truck. Driver Side: Often accessing gear while driving, the driver’s side is most quickly accessed without walking around the vehicle. Passenger Side: Often accessing gear while parked along a sidewalk or roadway; this keeps you out of traffic and closer to the point of use.

The shelves are fully adjustable, with 5 different height adjustments. They are also adjustable in length, so they can be placed into any of the slots regardless of front or rear panel rake angle.

The cabinet is designed to be easily assembled in place, without requiring the removal of your camper.

You must have “Billet Upper Bed Mounts” for this installation, as the lower mounting shelf cannot be adequately secured with older style sheet metal/extrusion hybrid upper mounts.

One shelf is included; additional shelves and non-structural shelf dividers are available for purchase separately and can be added at any time.

If you already have an oustanding order for a Camper or Topper, and wish to add a cabinet, the flatpacked assembly can only be shipped directly to your door!