Created for dirt bags but approved by high maintenance campers alike, the Superlite Mattress is minimalistic but designed for ultimate comfort. At 90x50, the mattress fits the exact footprint of the GFC SuperLite and Platform RTT but also can be used in a variety of RTT's or ground tents.
Featuring a 3-inch foam hybrid and high performance air valve for easy inflate and deflate. Leave the mattress inflated in your RTT or pack and go.
**Please note: Orders will begin shipping in Spring 2021.
Specifically designed for our Beef Rack, these machined and anodized Track Studs are useful for mounting any number of things to your beef rack or flight deck.
This 4 pack of Track Studs are CNC machined out of 6061 aluminum and clear anodized for durability. They're easy to use thanks to their insert-and-twist geometry. No need to slide them down the entire track, just insert sideways and rotate 90 degrees to tighten. Sold in packs of 4.
1/4-20 Track Studs come with washers and nuts.
We also offer an M6 Track Stud. These work great with a number of products on the market, and are particularly handy when mounting accessories made by Thule to your Beef Rack or Flight Deck. M6 Track Studs do not include washers and nuts.
**Track Studs are designed to work with Beef Rack and Flight Deck and are not compatible with the utility track on our campers and tents.**
4Runner Antenna delete
Deletes sharkfin antennas on 5th Gen 4Runners. For 2015 model 4Runners, please email firstname.lastname@example.org to place your order.
This sweet little nugget will make all of your dreams come true! That is assuming your dreams are to tie things down anywhere you want on your beef rack or flight deck system…
Robot crafted of the finest billet machined 6061-T6 goodness this side of the American Flag, the track nugget stands for freedom, strength, and security. While it is probably the most engaging tie-down system to ever to exist, its also a killer fidget spinner. Trust us, you’ll need an extra one to keep in your cup holder for those long road trips through the middle of nowhere.
Here are some things we have strapped down using the nugget.
Compatible with most smaller hook strap systems, you’ll want two per strap for most applications.
Try an 8 pack, you’ll save thirteen bucks!.
Designed for simple integration with our Beef Rack Cross Bars, the Solar Tray allows for easy solar panel mounting without requiring any drilling.
Most solar panels under 21.5" in width will fit the Solar Tray. For specific fitment questions, email email@example.com
*This is a new product, please anticipate 3-4 week shipping times*
Gutter Rail Mounting Kit
Designed and produced in house, this kit was created to mount our RTT on 60 and 80 series Toyota Land Cruisers. The kit includes 4 gutter rail clamps and hardware. If you have questions about fitment holler at firstname.lastname@example.org.
LP6 Light Mount
LP6 Light mount. May be compatible with other lighting systems. One mount is enough to mount one light.
Each mount includes the following
2 x PowderCoated Steel Attachment Arms
4 x 1/4-20 Aluminized Fasteners
4 x 1/4-20 Track Nuts
2 x Billet Machined Dogbones
Because this is a new product, orders will typically be fulfilled within 2-3 weeks of order date.
Machined 90° Bracket
Machined angle bracket with a 3/8 NMO antenna hole or 5/16 accessory hole. Designed to mount HAM radio antenna, but also handy for mounting lights or anything that needs a vertical mounting location.
Each bracket includes the following:
1 x Billet Anodized 90° Bracket
2 x 10/32 Track Nuts
2 x Stainless Mounting Fasteners
Because this is a new product, orders will typically be fulfilled within 3-4 weeks of the order date.
Beef Rack Cross Bar
Beef Rack is the ultimate modular rack system designed to mount on Go Fast Campers and Roof Top Tents. Beef Rack is an extremely rigid crossbar that features an extruded track on top and bottom to mount accessories. This track system is compatible with the attachment nuts found here.
Beef Rack is sold as an individual bar assembly, and you can mount bars at any quantity and spacing across the roof of your platform camper or RTT.
Standard bars (53") fit standard size camper and RTT.
XL Bars (59") fit XL campers.
Beef Rack orders will typically be fulfilled within 3-4 weeks of order date.
Platform Wind Skid
The Platform wind skid is ideal for making the leading edge of your camper or RTT a little more slippery.
This wind skid is not designed to improve MPG, but reduce wind noise. Especially for the RTT where unique mounting systems are common.
The Standard skid fits the Roof Top Tent and Standard size platform camper.
The XL skid fits the Platform XL camper.
Includes all mounting hardware.
5th Gen 4runner Tent Mounting Kit
The GFC Mounting kit for the 5th Gen 4runner combines mounting brackets designed to fit to the factory roof rack with a sharkfin antennae delete. This kit comes with instructions on how to install the system, as well as remove the factory antennae housing to be replaced with our custom cap, which enables mounting the tent 1/2" off the factory sheet metal for unparalleled low profile mounting.
8' Ladder for Tents and Campers
Our 8' collapsible ladder collapses down to nothing for easy stowing in or on your vehicle. Proprietary extrusion design allows for the ladder to be mounted along the length of the tent once opened.
Buffalo Check fitted sheets designed specifically for our cushions. Made of extremely comfortable flannel material and machine washable for easy cleaning.
Standard size fits our standard midsize truck camper.
XL version fits our XL camper product line.
Roof Top Tent version is a single sheet for our RTT.
Universal Bracket compatible with awnings such as Rhino-Rack, ARB, CVT, Frontrunner and EEZI-AWN, as well as a number of side mounted accessories. Sold as one individual bracket, two are needed to mount most awnings. Includes all mounting hardware (track nuts and stainless fasteners) to mount the bracket to our tent rail extrusion.
Wondering if the mounts are compatible with your awning or accessory? Or how many mounts you need? Shoot us an email at email@example.com and we will be able to help answer your questions.
Roof is 54” wide on the mid size trucks, so 58” bars work well and are slightly wider than the camper.
Roof is 60” wide on the full size trucks, so we recommend large (66” wide bars) or longer.
Platform Camper Track T-Nuts
Specifically designed for our custom utility tracks, these machined and anodized T-nuts are useful for mounting any number of things to your camper.
This 4 pack of T-nuts are CNC machined out of 6061 aluminum and clear anodized for durability. They're easy to use thanks to their insert-and-twist geometry. No need to slide them down the entire track, just insert sideways and rotate 90 degrees to tighten. Designed for use with an 10-32 fastener (4 included). Sold in packs of 4.
Designed for single use. Not intended for multiple installs.
Toyota Bedrail Track T-Nuts
Easy to use and designed specifically for the Toyota utility track.
Need to bolt something to your Toyota's utility track? Then you need these T-nuts. These T-nuts are CNC machined out of 6061 aluminum and clear anodized for durabiltiy. They're easy to use thanks to their insert-and-twist geometry. No need to slide them down the entire track, just insert sideways and rotate 90 degrees to tighten. Designed for use with a 5/16-18 bolt (not included). Sold in packs of 4.