Proprietary aluminum extrusion is connected by machined-from-billet aluminum joints, forming a triangulated space frame capable of supporting up to 800 pounds of dynamic load on its roof while distributing forces around the entire perimeter of your truck bed. All connections are bolted rather than welded together, eliminating the potential for stress fractures. Simply put, that means the Platform Topper works harder than anything else and lasts longer through more challenging terrain.
135 lbs (Depending on Truck Bed Size)
200 lbs per BEEF Bar (Max. 800 lbs with four bars)
All three access panels (one on each side and one in the rear) are made from 5052 aluminum and feature two locks per panel for added security. Our new locks were designed specifically for off-road applications and feature an improved dust flap to protect the core from gumming up (something that was sometimes an issue with our old locks), a smoother action, and the new key design allows the key to be inserted in either orientation for hassle-free actuation. Optional weather covers ensure reliable latching even in extreme weather and dusty environments.
The panels open using our proprietary Embassy Hinge design. It’s modeled after the hinges used in US embassies and noted for its ability to resist forced entry via gunfire. Needless to say, it’s the strongest hinge on the market and we’ve never had one fail. Overkill? Maybe. But that’s one less thing to worry about when you’re dodging cactus down in Baja or threading rocks on the Rubicon.
Every GFC is custom sized to the exact bed dimensions of a truck’s year, make, model, and trim. We make over 180 different truck specific models (and adding more all the time), so chances are we support your truck.
If your make and model shows up in the dropdowns on the Build & Price page, then we make it. Ford, Chevy, GM, Toyota, Nissan, Ram, Jeep, and Honda… we got you.
Welcome to the Community! You'll receive a confirmation email immediately, and a link to select your preferred install date and time in Belgrade, MT!
*Note: If your install is at a Partner Shop, your installation date will be scheduled by them.
Keep your entire truck bed free of clutter with our Cabinet System. Divided bays and adjustable shelves let you organize your gear into cubbies so you don’t have to spend time strapping things down, even off road.
The Cabinet System can be ordered with your Platform Topper and installed with it, or flat-packed and shipped to your door for easy DIY assembly and installation on any V2 Platform Topper or Camper.
It is affixed to the lower frame by utilizing the upper well-nut holes (upgraded to Plus Nuts), and a steel mount that is captive between the upper and lower bed mounts. These mounting rails allow for easy installation and removal of the cabinet by 1-2 people, and provide rigidity to the system.
Check out the Cabinet System accessory page for even more info!
|Bulb seal around truck bed edges: front, driver, passenger; Rubber sealing flap: rear tailgate
|Billet 6061 T-6, 3/8" socket head cap screw
|Topper Structural Members
|6061 T-6 aluminum
|5052 aluminum, Colors: black, gray, green, blue, red, white, metallic gray, metallic bronze, metallic silver
|Swing Out Panel Security
|Lever latches with trapdoor keyhole
|Automotive Glass (optional)
|Third Brake Light
|Integrated, wire harness and wiretap included
|Composite honeycomb panel
|Dynamic Roof Load
|*800 lbs. (*when using gfc beef bars)
|**135 lbs. ( **dependent on truck bed size)